We stock some boards up to 600mm wide. Should they not be available or you require wider sections Lanarkshire Hardwoods can offer a board joining service to create any width you like. This is a premium service carried out to very high standards so that you end up with an almost imperceptible join that will also be extremely strong. The narrower boards used to make up the width, the less it will warp.
- You pick the boards you would like used.
- Edges will be first planed by machine and then hand planed to exactly 90 degrees, dead straight and perfect along the whole length.
- The edges are biscuit jointed or domino jointed approx every 20 to 25cms along the length, glued and securely clamped.
- If you wish further finishing please ask for a quote.
Cost for board thicknesses up to 3.5cm: £60 per linear metre of first join, £30/lin m for a second join on the same worktop/unit, etc.
Cost for board thicknesses from 3.6 up to 5.5cm: £90 per linear metre of first join, £45/lin m for a second join on the same worktop/unit, etc.
Cost for board thicknesses from 5.6 up to 9.5cm: £120 per linear metre of first join, £60/lin m for a second join on the same worktop/unit, etc.
Lead times and availability will vary – please ask.